|
|
|
The CPU heat TERMINATOR! tm Premium Heatsink Lapping Kit #L5 Overclockers have used this process for years to gain that extra advantage in CPU cooling capacity and now you can too. Most heat sinks have a terribly uneven and rough mating surface...even some of the expensive ones are very rough and uneven. It can have an uneven surface, concave, convex, sand lines or grainy and lapping can help. The closer your heat sink is in relation to the CPU surface the more efficient it will cool. If you are overclocking it's a must and if not the cooler your CPU runs the better it performs so it's still a must.
COOLKIT LAPPING SYSTEM tm
Just using
SPECTRA COOL
thermal compound can reduce
your CPU temperature quite a lot, but you can get further reduction of
temperatures with most systems by lapping and here is why.
The smaller the gap between the heatsink and cpu the cooler it runs. BEFORE LAPPING LARGE ROUGH GAP & LOTS OF GREASE INEFFICIENT HEAT TRANSFER!
AFTER LAPPING SMALLER GAP & LESS GREASE more metal to metal contact NOW A COOLER CPU!
Includes 4 stages of wet-or-dry sandpaper along with HEAT SINK LAPPING IN 4 EASY STEPS We use only 3M quality wet-or-dry paper made in the USA for perfect results! Lapping can help your CPU run 5-10 degrees cooler and now anyone can do it! THEN USE SPECTRA COOL THERMAL GREASE AND YOU HAVE A REAL WINNER!
Purchase this product from a SPECTRA COOL Distributor today |
|
Send mail to
webmaster@spectracool.com with
questions or comments about this web site.
|
